Preco Cryl High-Friction Plastic 2K is used for type I and type II markings as a closed-finish line, profiled, agglomerate or flat marking on coarse surfaces.
Preco Cryl High-Friction Plastic 2K is a solvent-free, 2-component product with a polymethyl methacrylate (PMMA) resin base with coarse filling materials. Due to its special formulation, the product is particularly suitable for the manual application of thick-layer road and surface markings on coarse surfaces. Likewise, Preco Cryl High-Friction Plastic 2K enables type I and type II markings to be applied using conventional types of machinery. Preco Cryl products are suitable for bituminous surfaces as well as concrete substrates (with Triflex Than Primer L 1K).
- Triflex Than Primer L 1K – for sealing the concrete substrate and ensuring substrate adhesion
- Preco Cryl High-Friction Plastic 2K – for closed-textured, agglomerate and profiled markings as well as coating surfaces and cycle paths.
- Drop-on materials mix – according to the relevant BASt test certificate
Preco Cryl High-Friction Plastic 2K, density approx. 1.9 g/cm³
|Closed-finish line marking||Required volume approx. 4.50 kg/m² with a layer thickness of 2.5 mm. Volume required in relation to a 1 km continuous line.|
|Agglomerate marking||Required volume approx. 2.20 kg/m². Volume required in relation to a 1 km line.|
|Profiled marking||Required volume approx. 6.50 kg/m² with a layer thickness of 3 to 5 mm. Volume required in relation to a 1 km line.|
Calculation formula: line width (m) x line length (m) x volume (kg/m²) = volume required for area (kg)
- 1023 Traffic yellow
- 3009 Oxide red
- 3013 Tomato red
- 3020 Traffic red
- 5017 Traffic blue
- 6024 Traffic green
- 7043 Traffic grey B
- 9005 Black
- 9010 White