Preco Cryl Spray-Applied Resin 98:2 is used to create closed-finish, thin-layer type I and type II line markings.
Preco Cryl Spray-Applied Resin 98:2 is used for type I and type II closed-finish line markings. The cold spray plastic is perfect for marking roads with low traffic volumes, such as rural roads and streets in quiet residential areas. Because it dries very quickly, the product is also suitable for undercoats on roads with high traffic volumes or for refreshing agglomerates.
The road can be reopened to traffic within 10 minutes of the application. In some cases, there is not even an interruption to current road transport. Preco Cryl Spray Resin 98:2 can be applied with all common application methods using airless or compressed air method.
- Triflex Than Primer L 1K – for sealing the concrete substrate and ensuring substrate adhesion
- Preco Cryl Spray-Applied Resin 98:2 – for closed-textured markings
- Drop-on materials mix – according to the relevant BASt test certificate
Preco Cryl Spray-Applied Resin 98:2, density approx. 1.4 g/cm³
|Closed-finish line marking||Required volume approx. 0.84 kg/m² with a layer thickness of 0.60 mm.
Required volume approx. 1.05 kg/m² with a layer thickness of 0.75 mm.
Volume required in relation to a 1 km continuous line.
|Undercoat/Refreshing||Required volume approx. 0.42 kg/m² with a layer thickness of 0.30 mm.
Required volume approx. 0.56 kg/m² with a layer thickness of 0.40 mm.
Calculation formula: line width (m) x line length (m) x volume (kg/m²) = volume required for area (kg)
- 1023 Traffic yellow
- 6024 Traffic green
- 9010 White